EVERY 1 YEAR
2. If hoses and clamps are found to be worn or
damaged, replace or repair them at once.
(1) Hose
(1) Hose
(1) Hose
(2) Hose clamp
(3) Joint
4. Checking CVT intake air line
1. Check to see if the hoses and hose clamps are tight
and not damaged.
2. If any of the hoses and hose clamps is found worn
out or damaged, replace or repair it at once.
RTV-XG850
(2) Hose clamp
(2) Hose clamp
(A) Hydraulic tank
(1) Hose (Intake
CVT)
(2) Frame (Intake from inside of
hood)
(3) Hose clamp
(4) Rubber plug
(5) CVT cover
5. Checking engine breather hose
WARNING
To avoid serious injury or death:
• Be sure to stop the engine and remove the key
before checking engine breather hose.
Check to see if engine breather hoses are properly
fixed.
1. Stop the engine and let cool down.
2. If hose clamps are loose or oil leaks, tighten bands
securely.
3. Replace hoses and tighten hose clamps securely, if
engine breather hoses are swollen, hardened or
cracked.
Replace hoses and hose clamps every 4 years or
earlier if you checked and found that hoses are
swollen, hardened or cracked.
(1) Engine breather hose
PERIODIC SERVICE
(A) Left rear tire
(2) Clamp
77