Kubota SIDEKICK RTV-XG850 Operator's Manual page 19

CARE OF SAFETY LABELS
• Keep safety labels clean and free from obstructing material.
• Clean safety labels with soap and water, and dry with a soft cloth.
• Replace damaged or missing safety labels with new labels from your local KUBOTA Dealer.
• If a component with safety label(s) attached is replaced with a new part, make sure new label(s) is (are) attached
in the same location(s) as the replaced component.
• Attach new safety labels by applying on a clean dry surface and pressing any bubbles to the outside edge.
RTV-XG850
SAFE OPERATION
15