Toyota RAV4 Owner's Manual page 90

tery.
■ Customization (if equipped)
The alarm can be set to deactivate when
the key (vehicles without smart entry &
start system) or mechanical key (vehi-
cles with smart entry & start system) is
used to unlock.
(Customizable features: P.611)
NOTICE
■ To ensure the system operates
correctly
Do not modify or remove the system.
If modified or removed, the proper
operation of the system cannot be
guaranteed.
Intrusion sensor and tilt
sensor (if equipped)
The intrusion sensor and tilt
■
sensor detection
 The intrusion sensor detects
intruders or movement in the
vehicle.
 The tilt sensor detects changes
in vehicle inclination, such as
when the vehicle is towed away.
This system is designed to deter
and prevent vehicle theft but does
not guarantee absolute security
against all intrusions.
Setting the intrusion sensor
■
and tilt sensor
The intrusion sensor and tilt sensor
will be set automatically when the
alarm is set. (P.87)
Canceling the intrusion sensor
■
and tilt sensor
If you are leaving pets or other
1-3. Theft deterrent system
moving things inside the vehicle,
make sure to disable the intrusion
sensor and tilt sensor before setting
the alarm, as they will respond to
movement inside the vehicle.
1 Turn the engine switch to OFF.
2 Press the intrusion sensor and
tilt sensor cancel switch.
Press the switch again to re-enable the
intrusion sensor and tilt sensor.
Each time the intrusion sensor and tilt
sensor are canceled/set, a message
will be shown on the multi-information
display.
■
Canceling and automatic re-
enabling of the intrusion sensor
and tilt sensor
● The alarm will still be set even when
the intrusion sensor and tilt sensor are
canceled.
● Vehicles without smart entry & start
system: After the intrusion sensor and
tilt sensor are canceled, turning the
engine switch to ON or unlocking the
doors using the wireless remote con-
trol will re-enable the intrusion sensor
and tilt sensor.
● Vehicles with smart entry & start sys-
tem: After the intrusion sensor and tilt
sensor are canceled, pressing the
engine switch or unlocking the doors
using the entry function (if equipped)
or wireless remote control will re-
enable the intrusion sensor and tilt
sensor.
89
1