Toyota RAV4 Owner's Manual page 343

342
4-5. Using the driving support systems
 Vehicles with manual transmis-
sion
1 Fully depress the clutch pedal
and depress the brake pedal to
stop the vehicle.
2 Move the shift lever to N and
release the clutch pedal. The
engine will stop automatically.
When the engine is stopped by the Stop
& Start system, the Stop & Start indica-
tor will illuminate.
Restarting the engine
■
 Vehicles with automatic trans-
mission or CVT
Release the brake pedal. The
engine will start automatically.
When the engine starts, the Stop &
Start indicator will turn off.
 Vehicles with manual transmis-
sion
With the shift lever in N, depress
the clutch pedal. The engine will
start automatically.
When the engine starts, the Stop &
Start indicator will turn off.
When the brake hold system is
■
operating (vehicles with auto-
matic transmission or CVT)
 When the engine is stopped by
the Stop & Start system, if the
brake pedal is released the
engine will remain stopped.
 If the accelerator pedal is
depressed while the engine is
stopped by the Stop & Start sys-
tem, the engine will restart.
 While the engine is stopped by
the Stop & Start system, if the
engine is restarted, the brake
hold system will continue to
apply the brakes, unless the
operation conditions of the brake
hold system are no longer met.
(P.239)
When the dynamic radar
■
cruise control with full-speed
range is operating (vehicles
with a dynamic radar cruise
control with full-speed range)
 When the vehicle is stopped by
the dynamic radar cruise control
with full-speed range, the engine
will stop automatically even
though the brake pedal is not
depressed.
 When the preceding vehicle
starts off, the engine will restart
automatically.
 If the engine is restarted auto-
matically by the Stop & Start sys-
tem during a controlled stop by
the dynamic radar cruise control
with full-speed range, the con-
trolled stop will continue.