assistance.
"Sensitivity"
Select to set the lane departure alert
sensitivity.
"Sway Warning"
Select to enable/disable the vehicle
sway warning.
"Sway Sensitivity"
Select to set the vehicle sway warning
sensitivity.
LDA (Lane Departure Alert
■
with steering control) (if
equipped) (P.278)
Select to set up the following items.
"Steering Assist"
Select to enable/disable steering wheel
assistance.
"Sensitivity"
Select to set the warning sensitivity.
"Sway Warning"
Select to enable/disable the vehicle
sway warning.
"Sway Sensitivity"
Select to set the vehicle sway warning
sensitivity.
PCS (Pre-Collision Sys-
■
tem) (if equipped) (P.261)
Select to set up the following items.
PCS on/off
Select to enable/disable the pre-colli-
sion system.
"Sensitivity"
Select to change the pre-collision warn-
ing timing.
2-1. Instrument cluster
BSM (Blind Spot Monitor)
■
(if equipped) (P.309)
Select to set up the following items.
BSM (Blind Spot Monitor) on/off
Select to enable/disable the BSM sys-
tem.
"Brightness"
Select to switch the brightness of the
outside rear view mirror indicators.
(P.310)
"Sensitivity"
Select to change the alert timing for an
approaching vehicle.
(Toyota parking assist-
■
sensor) (if equipped) (P.318)
Select to set up the following items.
Toyota parking assist-sensor
on/off
Select to enable/disable the Toyota
parking assist-sensor.
"Volume"
Select to set the volume of the buzzer
which sounds when the Toyota parking
assist-sensor is operated.
RCTA (Rear Cross Traffic
■
Alert) (if equipped) (P.309)
RCTA (Rear Cross Traffic Alert)
on/off
Select to enable/disable the RCTA sys-
tem.
"Volume"
Select to change the RCTA buzzer vol-
ume.
115
2