Driving Mode Select Switch348 - Toyota RAV4 Owner's Manual

348
4-5. Using the driving support systems
NOTICE
■ To ensure the system operates
correctly
If any of the following situations occur,
the Stop & Start system may not oper-
ate correctly. Have your vehicle
inspected by your Toyota dealer.
● While the driver's seat belt is fas-
tened, the driver's and front pas-
senger's seat belt reminder light
flashes.
● Even though the driver's seat belt is
not fastened, the driver's and front
passenger's seat belt reminder light
does not illuminate.
● Even though the driver's door is
closed, the open door warning light
is illuminated or the interior light is
illuminated when the interior light
switch is in the door position.
● Even though the driver's door is
open, the open door warning light
does not illuminate or the interior
light does not illuminate when the
interior light switch is in the door
position.
■
If the engine stalls (vehicles with
manual transmission)
If the Stop & Start system is enabled
and the clutch pedal is depressed
quickly, the engine may restart.
Driving mode select
switch
The driving modes can be
selected to suit the driving and
usage conditions.
Selecting a driving mode
FF vehicles/Dynamic Torque
■
Control 4WD vehicles
1 Eco drive mode
Suitable for driving to improve fuel
economy by more smoothly generating
torque in response to accelerator pedal
operations compared to normal mode
and restraining air conditioning system
operations (heating/cooling).
When the switch is pressed while not in
Eco drive mode, the system switches to
Eco drive mode and the Eco drive
mode indicator illuminates on the multi-
information display.