WARNING
●
Stop the vehicle on level ground,
set the parking brake and shift the
shift lever to P (automatic transmis-
sion or CVT) or N (manual trans-
mission).
●
Do not allow anyone to sit on a
folded seatback or in the luggage
compartment while driving.
●
Do not allow children to enter the
luggage compartment.
●
Do not operate the rear seat if it is
occupied.
●
Be careful not to get feet or hands
caught in the moving parts or joints
of the seats during operation.
●
Do not allow children to operate the
seat.
■
After returning the rear seatback
to the upright position
●
Make sure that the seatback is
securely locked in position by lightly
pushing it back and forth.
If the seatback is not securely
locked, the red marking will be visi-
ble. Make sure that the red marking
is not visible.
●
Check that the seat belts are not
twisted or caught in the seatback.
3-3. Adjusting the seats
Driving position mem-
*
ory
*
: If equipped
This feature automatically
adjusts the driver's seat to suit
your preferences.
Your preferred driving posi-
tion (the position of the
driver's seat) can be recorded
and recalled by pressing a but-
ton.
Two different driving positions
can be recorded into memory.
Each electronic key can be
registered to recall your pre-
ferred driving position.
Recording/recalling a driv-
ing position
Recording procedure
■
1
Check that the shift lever is in P
(automatic transmission or CVT)
or N (manual transmission).
2
Turn the engine switch to ON.
3
Adjust the driver's seat to the
desired positions.
4
While pressing the "SET" but-
ton, press button "1" or "2" until
the buzzer sounds.
If the selected button has already been
preset, the previously recorded position
179
3