The Blind Spot Monitor function
Vehicles that can be detected by the Blind Spot Monitor
■
The BSM function uses radar sensors to detect the following vehicles trav-
eling in adjacent lanes and advises the driver of the presence of such vehi-
cles via the indicators on the outside rear view mirrors.
A
Vehicles that are traveling in areas that are not visible using the outside
rear view mirrors (the blind spots)
B
Vehicles that are approaching rapidly from behind in areas that are not
visible using the outside rear view mirrors (the blind spots)
The BSM function detection areas
■
The areas that vehicles can be detected in are outlined below.
The range of each detection area is:
A
Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the
vehicle
The area between the side of the vehicle and 0.5 m (1.6 ft.) from the side of the
vehicle cannot be detected.
B
Approximately 1 m (3.3 ft.) forward of the rear bumper
C
Approximately 3 m (9.8 ft.) from the rear bumper
4-5. Using the driving support systems
313
4