AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM(for Radio and Display Type): DTC ...
Last Modified: 03-12-2013
Model Year: 2013
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM(for Radio and Display Type): DTC CHECK / CLEAR;
2013 MY RAV4 [12/2012 -
DTC CHECK / CLEAR
1. CHECK DTC (CHECK USING TECHSTREAM)
(a) Connect the Techstream to the DLC3.
(b) Engine start.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
(e) Check for DTCs, and then write them down.
Body Electrical > Navigation System > Trouble Codes
(f) Check the details of the DTC(s).
Click here
2. CLEAR DTC (CLEAR USING TECHSTREAM)
(a) Connect the Techstream to the DLC3.
(b) Engine start.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Navigation System / Clear DTCs.
(e) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
3. START DIAGNOSTIC MODE
HINT:
•
Illustrations may differ from the actual vehicle screen depending on the device settings and
options. Therefore, some detailed areas may not be shown exactly the same as on the actual
vehicle screen.
•
Start diagnostic mode 15 seconds after engine started. Otherwise, some items cannot be checked.
(a) While pressing and holding the "Media" or "Audio" switch, operate the light control switch: Off →
Tail → Off → Tail → Off → Tail → Off.
mhtml:file://C:\Users\SB185219\Downloads\RM1000000004ZPI - DTC CHECK_CLEAR...
6.4 D
Doc ID: RM1000000004ZPI
Model: RAV4
Prod Date Range: [12/2012 -
]
Page 1 of 8
]
8/28/2013
Need help?
Do you have a question about the RAV4 and is the answer not in the manual?
Questions and answers