Table of Contents
Advertisement
Buttonhole stitch
Buttonholes can be adapted to the size of the button.For stretch fabric or thin
fabric, it is recommended to use a stabilizer for a better buttonhole finish.
Please Note:
Before sewing a buttonhole on your project, practice on a scrap piece of the same type of
fabric.
1.
Using tailor's chalk, mark the position of the buttonhole on the fabric.
2.
Attach the buttonhole foot and set the pattern selector dial to
Set the stitch length dial to
according to the project, sew a test first to determine this.
3.
Lower the presser foot aligning the marks on foot with the marks on the fabric (1). The
front bar tack will be sewn first. Align the mark on the fabric (a) with the mark on the foot (b).
4.
Open the button plate and insert the button. (2)
5.
Lower the buttonhole lever and gently push it back (3).
6.
While lightly holding the upper thread, start the machine.
7.
Buttonhole stitching is done in the order (4).
8.
Stop the machine when the buttonhole cycle has completed.
. The width however may need to be adjusted
30
.
Advertisement
Table of Contents
