Attaching and removing the presser foot
Turn the power switch to off when carrying out any of the operations below! Always use the proper foot for
the selected pattern. The wrong foot can cause the needle to break.
1
Select the best fitting foot...
2
3
Remove and insert the presser foot holder
Insert the edge/quilting guide
Lift the sewing foot lifter.
Press the rear lever to
release the sewing foot.
Lower the presser foot
lifter until the recess meets
the pin. The sewing foot is
automatically attached to the
presser foot holder.
Lift the presser foot lifter.
Align it with the lower left
side of the sewing foot bar.
Hold the presser foot holder
and tighten the screw.
Insert the edge and quilting
guide into the slot as shown.
Set the width according to
your sewing applications.
9
Cotton
3-43
-5
Power Stitch foot
3-44
-5
Canvas
3-45
-6
Synthetic PU
3-45
-7
Leather
3-45
-7