Chapter 2 - Installation
2.5.5.3
Window Mount
The installation kit includes 2 suction cups.
Attach the suction cups to the antenna. Refer to Figure 2-17 for directions.
1
Determine the location of the antenna on the glass. Attach it to the window by
2
pressing the suction cups onto the glass.
Connect the antenna cable to the connector located on the bottom side of the
3
antenna. Use only the torque key supplied with the antenna. Do not over
tighten. Do not use a wrench or a similar tightening tool.
56
Figure 2-17: Window Mounting the Antenna
BreezeACCESS VL System Manual