Alvarion BreezeACCESS VL System Manual page 250

Appendix E - BreezeACCES VL MIB
MIB Parameter
*RoamingOption
(*BridgeParameters 9)
*MacAddressDenyList
(*BridgeParameters 10)
*MacAddressDenyListTable
(*MacAddressDenyList 1)
*MacAddressDenyListEntry
(*MacAddressDenyListTable 1)
*MacAddressDenyListTableIdx
(*MacAddressDenyListEntry 1)
*MacAddressDenyListId
(*MacAddressDenyListEntry 2)
*MacAddressDenyListAdd
(*MacAddressDenyList 2)
*MacAddressDenyListRemove
(*MacAddressDenyList 3)
*NumberOfMacAddressesInDenyList
(*MacAddressDenyList 4)
*MacAddressDenyListAction
(*MacAddressDenyList 5)
*PortsControl
(*BridgeParameters 11)
*EthernetPortControl
(*PortsControl 1)
224
Description
Applicable to SU/RB only.Disable/enable
the roaming feature. When enabled, the
SU will start scanning for an AU/RB after
one second of not receiving beacons from
current AU/BU. Once it found a new
AU/BU, it will also send through the
wireless network a roaming SNAP on
behalf of its clients informing other
devices in the network of their new
location. When disabled, it will wait for
seven seconds before starting scanning,
and it will not send roaming SNAPs.
MAC Address Deny List parameters
Applicable to AU only. Not applicable to
BreezeNET B units. A list of up to 100
MAC Addresses. If
brzaccVLMacAddressDenyListAction is
set to denyList, these are SUs that are not
allowed to transfer data to the AU.
If brzaccVLMacAddressDenyListAction is
set to allowList, only these SUs are
allowed to transfer data to the AU. Not
accessible.
Applicable to AU only. Not applicable to
BreezeNET B units. An entry in the Mac
Address Deny List Table. Not accessible.
Applicable to AU only. Not applicable to
BreezeNET B units. A read only table
index for a MAC Address entry in the Mac
Address Deny List Table.
Applicable to AU only. Not applicable to
BreezeNET B units. The list of MAC
Addresses in the MAC Address Deny List
Table. To Remove a MAC Address - SET
the corresponding entry to 0. To Add a
new MAC Address - SET an entry which
is currently 0.
Applicable to AU only. Not applicable to
BreezeNET B units. Add a MAC address
to the MAC Address Deny List Table
Applicable to AU only. Not applicable to
BreezeNET B units. Remove a MAC
address from the MAC Address Deny List
Table
Applicable to AU only. Not applicable to
BreezeNET B units. Read only. The
number of MAC addresses in the MAC
Address Deny List Table.
Applicable to AU only. Not applicable to
BreezeNET B units. Defines the action to
be used by the Mac Address Deny List.
Ports Control parameters. Applicable to
SU/RB only.
Applicable to SU/RB only.
Enable/disable the Ethernet port. When
disabled, only data frames are blocked.
Management frames are accepted.
Value/Range
Integer
disable (1)
enable (2)
na (255)
Integer
Range: 1 to 100
MAC Address
MAC Address
MAC Address
Integer
Range: 0 to 100
Na (255)
Integer
denyList (1),
allowedList (2),
na (255)
Integer
disable (1),
enable (2),
na (255)
BreezeACCESS VL System Manual