Figure 2-8: Bottom Panel of the New SU-A-ODU (without IDU COM Sealing Cap)
NOTE
The MAC Address of the unit is marked on both the ODU and the indoor unit (on the print side of
the BS-AU module or on the bottom side of the Universal IDU). If for any reason the ODU is not
used with the IDU with which it was shipped, the MAC Address of the system is in accordance with
the marking on the ODU.
2.3.4
Connecting the Indoor-to-Outdoor Cable
2.3.4.1
Units with an Installed Waterproof Seal (not applicable to
new SU-A-ODU)
To connect the indoor-to-outdoor cable:
Remove the two screws holding the waterproof seal to the outdoor unit and
1
remove the waterproof seal.
Unscrew the top nut from the waterproof seal.
2
Installation
Figure 2-9: The Waterproof Seal
Installing the Outdoor Unit
43