Alvarion BreezeACCESS VL System Manual page 284

Appendix E - BreezeACCES VL MIB
MIB Parameter
*AdbAdapModOption
(*AUAdbEntry 36)
*AdbBurstModeOption
(*AUAdbEntry 37)
*AdbConcatenationOption
(*AUAdbEntry 39)
*AdbSecurityMode
(*AUAdbEntry 41)
*AdbAuthOption
(*AUAdbEntry 42)
*AdbDataEncryptOption
(*AUAdbEntry 43)
*AdbAge
(*AUAdbEntry 44)
*AdbUnitName
(*AUAdbEntry 45)
*UpLinkQualityIndicator
(*SiteSurvey 6)
*MeasureUpLinkQualityIndicator
(*UpLinkQualityIndicator 1)
*ReadUpLinkQualityIndicator
(*UpLinkQualityIndicator 2)
*UpLinkQualityIndicatorStatus
(*UpLinkQualityIndicator 3)
*MacPinpoint
(*SiteSurvey 7)
*MacPinpointTable
(*MacPinpoint 1)
*MacPinpointEntry
(MacPinpointTable 1)
258
Description
Applicable to AU/BU. Read-only. The
current Adaptive Modulation Option of
the relevant SU/RB.
Applicable to AU/BU. Read-only. The
current Burst Mode Option of the
relevant SU/RB.
Applicable to AU/BU. Read-only. The
current Concatenation Option of the
relevant SU/RB.
Applicable to AU/BU. Read-only. The
current Security Mode of the relevant
SU/RB.
Applicable to AU/BU. Read-only. The
current Authentication Algorithm Option
of the relevant SU/RB.
Applicable to AU/BU. Read-only. The
current Data Encryption Option of the
relevant SU/RB.
Applicable to AU/BU. Read-only. The
time in seconds elapsed since receiving
the last packet from the relevant SU/RB.
Applicable to AU/BU. Read-only. The
Unit Name of the relevant SU/RB.
UpLink quality Indicator (LQI)
parameters. Applicable only to SU/RB.
Applicable to SU/RB. Starts calculation
of LQI. The calculation will be for a
period of 10 seconds.
Applicable to SU/RB. Read-only. The
results of the last LQI calculation.
Applicable to SU/RB Only. Indicates the
test conditions. fullTest means that there
are no limitations on the range of
available modulation levels, and that all
modulation levels from 1 to 8 can be
used. limitedTest indicates that the
results may not indicate the true quality
since the available range is limited - by
HW (HW Revision A), or by the
applicable parameters in the country
code, or by the configurable Maximum
Modulation Level parameter.
Applicable to AU/BU. MAC Pinpoint
parameters.
Applicable to AU/BU. MAC Pinpoint
table. Not accessible.
Applicable to AU/BU. An entry in the
MAC Pinpoint table. Not accessible.
Each entry contains an Ethernet station
MAC address and the MAC address of
the wireless device used to connect it to
the wireless network
BreezeACCESS VL System Manual
Value/Range
Integer
disable (1),
enable (2),
na(255)
Integer
disable (1),
enable (2),
na(255)
Integer
disable (1),
enable (2),
na(255)
Integer
wep (1),
aesOCB (2),
fips197 (3)
na(255)
Integer
openSystem(1),
sharedKey (2),
na(255)
Integer
disable (1),
enable (2),
na(255)
Integer
DisplayString
Integer
start (1),
cancel (2)
Integer
1-8.
Integer
fullTest (1),
limitedTest (2)