Alvarion BreezeACCESS VL System Manual page 248

Appendix E - BreezeACCES VL MIB
MIB Parameter
*VlanIdForwarding
(*VlanForwardingEntry 2)
*VLANRelaying
(*VLANSupport 5)
*VlanRelayingSupport
(*VLANRelaying 1)
*VlanRelayingTable
(*VLANRelaying 2)
*VlanRelayingEntry
(*VlanRelayingTable 1)
*VlanRelayingTableIdx
(*VlanRelayingEntry) 1
*VlanIdRelaying
(*VlanRelayingEntry 2)
*VLANTrafficPriority
(*VLANSupport 6)
*VlanDataPriority
(*VLANTrafficPriority 1)
*VlanManagementPriority
(*VLANTrafficPriority 3)
*VlanPriorityThreshold
(*VLANTrafficPriority 4)
*VLANQinQ
*VLANSupport 7
*QinQEthertype
(*VLANQinQ 1)
*QinQProviderVlanID
(*VLANQinQ 2)
*BridgeAgingTime
(*BridgeParameters 2)
222
Description
Applicable to all units. The list of VLAN
ID's in the VLAN ID Forwarding Table. To
remove a VLAN ID - SET the
corresponding entry to 0. To add a new
VLAN ID SET an entry which is now 0.
VLAN Relaying feature parameters. Not
applicable to BreezeNET B products.
Applicable to AU only. Not applicable to
BreezeNET B products. Enables or
disables the VLAN Relaying feature.
Applicable to Trunk and Service Provider
links only.
Applicable to AU only. Not applicable to
BreezeNET B products. A table of up to
20 VLAN IDs of devices to which data
frames are relayed when the VLAN
Relaying feature is Enabled. Applicable to
Trunk and Service Provider links only. Not
accessible.
Applicable to AU only. Not applicable to
BreezeNET B products. A VLAN Relaying
Table entry. Applicable to Trunk and
Service Provider links only. Not
accessible.
Applicable to AU only. Not applicable to
BreezeNET B products. A read only table
index for a VLAN entry in the VLAN
Relaying Table.
Applicable to AU only. Not applicable to
BreezeNET B products. The list of VLAN
ID's in the VLAN ID Relaying Table. To
remove a VLAN ID - SET the
corresponding entry to 0. To add a new
VLAN ID SET an entry which is now 0.
VLAN traffic priority parameters.
Applicable to SU/RB only.
Priority tagging for data frames.
Applicable to Access Link only.
Applicable to all units. Priority tagging for
management frames. Applicable to
Access Link and Trunk Link only.
Applicable to all units. Not applicable to
units with SW version 3.1 and higher
where this parameter is replaced by
Priority threshold for tagged frames
received from Ethernet port. Applicable to
Hybrid Link and Trunk Link only.
QinQ (Service Provider Link) parameters.
Not applicable to BreezeNET-B units.
Applicable to AU and SU. The Ethernet
type of the Service Provider tag
Applicable to SU only. VLAN ID of the
Service Provider tag.
Applicable to all units. Bridge aging time
for devices learned from both the Ethernet
and wireless link ports.
Value/Range
Integer
1-4094
0-remove entry.
Integer
disable (1)
enable (2)
na (255)
Integer
1-20
Integer
1-4094
0-remove entry.
Integer
0 – 7
255-na
Integer
0 – 7
255-na
Integer
0 – 7
255-na
Integer
33024 0
( x8100) –
36864 (0x9000),
37120 (0x9100),
37376 (0x9200)
Integer
1-4094
Integer
20 – 2000 (seconds)
BreezeACCESS VL System Manual