Alvarion BreezeACCESS VL System Manual page 253

MIB Parameter
*MaxTxPower
(*MaximumTransmitPowerEntry 4)
*MaxNumOfAssociations
(*AirInterface 10)
*BestAu
(*AirInterface 11)
*BestAuSupport
(*BestAu 1)
*BestAuNoOfScanningAttempts
(*BestAu 2)
*PreferredAuMacAddress
(*BestAu 3)
*NeighborAuTable
(*BestAu 4)
*NeighborAuEntry
(*NeighborAuTable 1)
*NeighborAuIdx
(*NeighborAuEntry 1)
*NeighborAuMacAdd
(*NeighborAuEntry 2)
*NeighborAuESSID
(*NeighborAuEntry 3)
*NeighborAuSNR
(*NeighborAuEntry 4)
BreezeACCESS VL System Manual
Description
Applicable to SU/RB. Read-only for
units with SW version 4.0 and
higher.
The maximum transmit power level
that can be either configured for the
*TxPower parameter or reached by
the ATPC algorithm.
Applicable to AU. Not applicable to
BreezeNET B products. The upper
limit for the number of Subscriber
Units that can be associated with the
AU.
Best AU/BU parameters. Applicable
to SU/RB.
Applicable to SU/RB. Disable/enable
the Best AU/BU selection
mechanism
Applicable to SU/RB. The number of
scanning attempts to collect
information for the Best AU/BU
decision
Applicable to SU only. The MAC
address of the preferred AU/BU
(overriding the Best AU/BU selection
process).
Applicable to SU/RB. Not
accessible. Neighboring AUs/BUs
table.
Applicable to SU only. Not
accessible. An entry in the
Neighboring AUs table.
Applicable to SU/RB. Read-only. An
Index of an entry in the Neighboring
AU/BU Table
Applicable to SU/RB. Read-only.
The MAC Address of the AU/BU
associated with the entry in the
Neighboring AU/BU Table
Applicable to SU/RB. Read-only.
The ESSID of the AU/BU associated
with the entry in the Neighboring
AU/BU Table. Accessible only with
the SNMP Write community string
(Administrator Password).
Applicable to SU/RB. Read-only.
The average SNR at which the
SU/RB receives the AU/BU
associated with the entry in the
Neighboring AU/BU Table.
breezeAccessVLMib
Value/Range
DisplayString
Range: -10 to the maximum
defined by the
*DefinedMaximumTxPowerR
ange for the applicable
modulation level.
Integer
AU-BS, AU-SA: 0-512 (0-124
if Data Encryption Option is
enabled).
AUS-BS, AUS-SA with SW
version 4.0 and higher: 0-8.
AUS-BS, AUS-SA with SW
version below 4.0: 0-5.
na (65535)
Integer
disable (1)
enable (2)
na (255)
Integer
1-255
Mac Address
000000000000 means no
preferred AU
Integer
Range: 1...20
MAC Address
DisplayString
Integer
Na (255)
227