Antenna Installation - Alvarion BreezeNET DS.11 User Manual

Front Matter

Antenna Installation

WARNING: It is the responsibility of the installer to insure that when using the outdoor antenna kits
in the United States (or where FCC rules apply), only those antennas certified with the
product are used. The use of any antenna other than those certified with the product is
expressly forbidden in accordance to FCC rules CFR47 part 15.204.
The installer should configure the output power level of antennas, according to country regulations and
per antenna type.
Note: The FCC 15.203 requirements prohibit the connection of external antennas with standard
N-type connectors. In order to meet this requirement, the external antenna connectors provided
on DS.11D models (with no integral antenna) are non-standard, featuring left-handed (counter-
clockwise) rotation.
Information to User
Any changes or modifications of equipment not expressly approved by the manufacturer could void the
user's authority to operate the equipment and the company's warranty.
Contacting BreezeCOM Technical Support
Should you need assistance beyond the scope of this guide, please contact your local BreezeCOM reseller
or distributor. If they cannot solve your problem, feel free to contact the BreezeCOM Technical Support
Department. The support representatives can assist you in solving any problems that cannot be solved by
your reseller.
When requesting support, please have the following items available:
Configuration of the system, including models of the BreezeCOM equipment used.
Antenna type and cable lengths.
Site information such as possible radio path problems (like trees, machines, and buildings).
Distance between devices.
Configuration, statistic counters, and error messages as seen on the monitor.
Description of problems encountered.
To contact BreezeCOM Technical Support, refer to the Technical Support page of the BreezeCOM web
site: www.breezecom.com.
User's Guide iv BreezeNET BU-DS.11/RB-DS.11