Table of Contents
Advertisement
3-6.
Switching Regulator (Large)
Preparation
1.
Remove the cover. (Refer to
Procedure
1.
Disconnect the three harnesses from the connectors (CN1, CN51 and CN53) on the switching regulator (large).
2.
Remove the four screws, then remove the switching regulator (large).
3.
Remove the heat transfer sheet PS-R1 from the switching regulator (large).
Harness
4.
Install the removed parts by reversing the steps of removal.
HXCU-FB80
"3-2.
Cover".)
PSW
3 x 6
CN1
CN51
Heat transfer sheet PS-R1
Switching regulator (large)
CN53
Harnesses
The illustration shows LEMO model.
3-8
Hide quick links:
Advertisement
Table of Contents
