Table of Contents
Advertisement
6
Click "Use the following IP address",
and then enter the IP address in the IP
address field.
Note
Make sure not to use an IP address that
is already assigned to another device
on the network.
7
Enter "255 255 255 0" into the Subnet
Mask field.
8
Click "OK" to close the internet
protocol (TCP/IP) properties window.
9
Click "Close" to close the local area
connection properties window.
Parts Identification
In this section, parts of the main display of this software are explained.
1 Search Devices button
5 MAC address display
4 Name setting display
Software installation
For details on installing procedure, refer to the
printed Operating Instructions.
Starting Up and Exiting the
Software
To start up the software
Select "Start> All Programs> Sony>
Digital Wireless Microphone System>
RMU-01 Setting Tool" to start up the
software.
To exit the software
Click the Close button (×) in the top-right
corner of the window.
8 Location setting display
7 Subnet Mask setting display
6 IP Address setting display
2 Setting button
3 Option button
qa Version display
0 Remote CH setting display
9 Target TX setting display
Using the RMU-01 Setting Tool
13
Advertisement
Table of Contents
