Table of Contents
Advertisement
Installation
Removing PMC
To remove the PMC from IXP/CPCI-9120 follow the steps detailed here:
1. Turn off system power.
2. Remove IXP/CPCI-9120 from the system as per the removal procedure detailed in
section "Installation in a Non-Powered System".
3. Carefully unscrew the PMC from the bottom of the IXP/CPCI-9120.
4. Carefully remove the PMC module from IXP/CPCI-9120 by disengaging PMC
connectors.
5. Cover empty slot of IXP/CPCI-9120 with PMC filler slot.
IXP/CPCI-9120
Switch Settings
53
Advertisement
Table of Contents
