Executing Programs From Redboot; Arguments - Motorola IXP-9120 Reference Manual

Executing Programs from RedBoot

Executing Programs from RedBoot
Once an image has been loaded into memory, either via the load command or the
command, execution may be transferred to that image.
Note: Once the
Boot.
1.
- Execute a program
go
The format of the
RedBoot> go [-w time] [location]
Execution will begin at location if specified. Otherwise, the entry point of the last image
loaded will be used.
The option gives the user time seconds before execution begins. The execution may be
-w
aborted by typing
scripts.
2.
- Execute a Linux kernel image
exec

Arguments

[-w timeout]
[-b <load addr> [-l <length]]
[-r <ramdisk addr>
[-s <ramdisk length>]]
[-c "kernel command line"] [<entry_point>]
[-p <params address>]
140
command is executed, control cannot be transferred back to the Red
go
command is:
go
on the console. This mode would typically be used in startup
Ctrl+C
RedBoot
fis load
IXP/CPCI-9120