Table of Contents
Advertisement
Front Panel
Table 10: Description of Front Panel LEDs
LED
Green
Yellow
Keys
Front Panel Reset
A pinhole reset switch is provided on the front panel. Pressing this switch causes all devices
on the IXP/CPCI-9120 to reset except IBMU. This reset will be active as long as the reset
switch is held in the active position.
Resets from the front panel can be disabled by means of switch settings (see "Description of
Front Panel LEDs" page -65).
Connectors
D-Type Subminiature Connector
A D-type subminiature connector is used to facilitate debug and software development.
Modem controls are not supported on this connector.
Figure 11: D Subminiature Connector Pinout
66
Controls, Indicators and Connectors
Description
Link OK
Collision
IXP/CPCI-9120
Advertisement
Table of Contents
