Motorola IXP-9120 Reference Manual page 139

Flash Image System (FIS)
-l - The configuration data is simply listed.
Example
RedBoot> fconfig -l
-n - Displays nicknames of the parameter.
Example
RedBoot> fconfig -n
-f - Displays the full name.
Example
nickname [value]- Nicknames provide a quick way to set a single entry using the format. If no
value is supplied, the command will list and prompt for only that entry. If a value is supplied,
then the entry will be set to that value. You will be prompted to write the new information into
flash if any change was made.
Example
RedBoot> fconfig boot_script
y
138
Run script at boot: false
Use BOOTP for network configuration: false
Local IP address: 10.208.33.99
Default server IP address: 10.208.33.50
Network debug: false
Default network device: i82546_gb2
RedBoot>
boot_script: false
bootp: false
bootp_master_ip: 10.208.33.99
bootp_server_ip: 10.208.33.50
net_debug: false
net_device: i82546_gb1
RedBoot>
RedBoot> fconfig -f
Run script at boot: false
Use BOOTP for network configuration: false
Local IP address: 10.208.32.99
Default server IP address: 10.208.33.50
Network debug: false
Default network device: i82546_gb0
RedBoot>
boot_script: true f
Update RedBoot non-volatile configuration - are you sure (y/n)?
... Unlock from 0xc43c0000-0xc43e0000: .
... Erase from 0xc43c0000-0xc43e0000: .
... Program from 0x00059d80-0x0005ad80 at 0xc43df000: .
... Lock from 0xc43c0000-0xc43e0000: .
RedBoot>
RedBoot> fconfig bootp_master_ip 10.208.33.133
bootp_master_ip: 10.208.33.99 Setting to 10.208.33.133
RedBoot
IXP/CPCI-9120