Table of Contents
Advertisement
Controls, Indicators and Connectors
Front Panel
An IEEE 1101.10-compliant front panel is used on the IXP/CPCI-9120. The front panels are
equipped with an EMC gasket and two ejector/injector handles.
The front panel accommodates the following:
•
Hot swap status LED (Blue LED) placed above the lower ejector.
•
One bi-color LED for power status
•
Two bi-color LEDs per gigabit ethernet port to indicate status and speed (total eight).
•
Two general purpose/user-defined bi-color LEDs.
•
Pinhole reset switch
•
Serial port in a D-type subminiature connector (MD-9)
•
Cutouts for one PMC Module.
The board is shipped with a filler panel attached to the PMC cutout.
IXP/CPCI-9120
Front Panel
63
Advertisement
Table of Contents
