Devices' features and Data Paths
IBMU runs totally independent of the IXP2400, its main task being monitoring and logging of
events.
IBMU shall be fully functional even when the IXP/CPCI-9120 is not powered.
IBMU is mapped on to IXP2400's SlowPort area. Communication between the IPMI control-
ler and the IXP2400 is achieved through the General Purpose EPLD, which translates slow-
port signals into X-bus and vice versa.
ICMB
ICMB is an RS-485-based bus used to connect the BMCs of two or more chassis. The ICMB
port of IXP/CPCI-9120 is located on the RTB. Connections from the IPMI controller are
routed through CompactPCI connectors to the RTB.
IXP/CPCI-9120
Block Diagram
87