Video Setup Tab - FLIR X-Series User Manual

NOTE: It is possible for a bad pixel to fail more than one category, so the total bad pixels may be less
than the sum of each category. "Factory" bad pixels are those that were determined to be bad during
camera production testing.

5.4.3.3 Video Setup Tab

The X-series cameras have a 14-bit digital output. However, the video output is only 8-bit. An
Automatic Gain Control (AGC) algorithm is used to map the 14-bit digital to the 8-bit analog data. The
Video Tab provides controls related to optimizing the Analog video output. These controls affect
only the HD/SD video. The diagram below shows a flow chart of the video process and how the
parameters of this screen are used.
GUI: Plateau P
Uncorrected Data
Mux
Corrected Data
GUI: NUC'd
GUI: Bounds
X-series User's Manual
Plateau
Scalar
GUI: Overlay
Mux
Linear
Scalar
GUI: AGC Mode
Video Flow
5 – X-series Camera Controller
GUI: Palette
Pallete
Overlay
Scalar
GUI: Format
GUI: Position
GUI: Brightness
GUI: Contrast
Video
Analog Video
Encoder
53