Basic User Mode - FLIR X-Series User Manual

5.3 Basic User Mode

The Basic User mode enables a limited set of controls, thus greatly simplifying the controller interface.
Most controls will be disabled until the user connects to the camera using the Camera>>Connect
menu option.
Manually Setting Integration Time
Setting Window Size
Setting Frame Rate
On-camera NUC
NUC Management
NUC Controls
External Sync
Preset Sequencing/Superframing
Independent Video and Data NUC
Analog AGC
AGC Filter
Temporal Filter
Invert/Revert
Digital Zoom
Color Palette
Overlay Controls
X-series User's Manual
Features supported in Basic Mode
YES
Limited, Four window choices
YES
Must be enabled
None (Fixed NUC name)
1-pt, 2-pt, Update Offset
Only using SYNC IN BNC
NO
NO
Manual Linear, PE, DDE,
Brightness/Contrast, no ROI mode
ON/OFF Only
ON/OFF Only
NO
YES
YES
NO
5 – X-series Camera Controller
22