Configuring Firefly Setup; Configuring Camera Drivers - FLIR FIREFLY Installation Manual

5

Configuring Firefly Setup

After successful installation of your camera and interface card, you can make changes to the setup. Use the tools
described below to change the driver for your interface card.
For information on updating your camera's firmware post installation, see
5.1

Configuring Camera Drivers

Camera drivers are provided as part of the Spinnaker SDK. The first time the camera is connected to the computer, the
operating system installs the driver.
To manage and update drivers use the SpinView application:
1. Start SpinView:
Start Menu-->All Programs-->Point Grey Spinnaker SDK-->SpinView
2. From the Devices list, select the camera and click the Switch Driver button.
3. Select the driver from the drop-down list.
4. Click Install Driver.
6/27/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
Camera
®
FLIR Firefly Installation Guide
5 Configuring Firefly Setup
Firmware.
9