Filter/Flag; Flag Controls - FLIR X-Series User Manual

Sync Out Delay
Sync Out Source
Sync Out Polarity

5.4.2.4 Filter/Flag

The Filter/Flag page controls the internal NUC flag and warm filter wheel.
5.4.2.4.1

Flag controls

Normally the NUC flag is primarily used with the Auto NUC function. However, it can be manually
controlled from this page.
X-series User's Manual
Sync Out Options
Allows for the user to set a delay (in microseconds) for the sync out
on a preset basis.
Allows for the sync out to be referenced to the start of frame or start
of integration.
Allows for the sync out to be active high or low.
5 – X-series Camera Controller
42