Performance Characteristics; Non Uniformity Correction - FLIR X-Series User Manual

8.5 Performance Characteristics

Power Consumption
FLIR PWR Supply @ 120V
Power Consumption
Camera DC Power @ 24V
Cool-Down Time
Sensitivity (w/o optics)
Factory Calibration
Temperature Measurement
Ranges
Factory Calibration
Temperature Measurement
2
Accuracy
1) NET is at 50% nominal bucket fill, 298K background, + 5
2) Assuming ideal laboratory conditions (close range, known high emissivity targets, stabilized camera and lens temperatures) and
only if the lens and camera are matched, i.e. not a 3-5 micron lens on a broadband camera.

8.6 Non Uniformity Correction

NUC Types
X-series User's Manual
Continuous Cool Down:
Continuous Normal:
AC
Continuous Normal w/NUC Flag:
DC
Continuous Normal w/NUC Flag: 36 Watts
≈7 minutes to reach operating temperature
InSb: <20mK (18 mK typ.)
NEΔT
1
SLS: <45mK (40 mK typ.)
InSb:
20°C to 350°C (-4°F to 662°F)
-
45°C to 600°C (113°F to 1,112°F
250°C to 2000°C (482°F to 3,632°F)
500°C to 3,000°C (932°F to 5,432°F)
SLS:
-20°C to 650°C (-4°F to 1,202°F)
250°C to 1,500°C (482°F to 3,632°F)
500°C to 3000°C (932°F to 5,432°F)
± 1°C or ± 1% of reading
0°C to +3000°C (17mm, 25mm, 50mm, 100mm, 200mm
Lenses)
± 2°C or ± 2% of reading
-20°C to 0°C (17mm, 25mm, 50mm, 100mm, 200mm lenses)
-10°C to +500°C (1X & 4X Closeup lenses)
o
C signal
One Point (offset value with unity gain)
Two Point (offset and gain values, non-volatile)
Two Point w/Bad Pixel Detection/Replacement
Continuous Cool Down: 24 Watts
Continuous Normal: 21.25 Watts
8 – Specifications
50 VA
41 VA
75 VA
87