Table of Contents
Advertisement
Quick Start Guide
Names and Descriptions of E5070B/E5071B parts
10. MKR/ANALYSIS Block
A group of keys used for analyzing measurement results through markers, the fixture
simulator function, etc. For more information on the keys in the MKR/ANALYSIS Block,
see Chapter 2 "Overview of Functions" in the E5070B/E5071B User's Guide.
11. Test Port
While the signal is being output from a test port, the yellow LED above the test port lights
up. The connector type adopted is the 50 Ω-based N-type (female) connector.
12. Front USB Port
Used to connect a printer, a multiport test set or an ECal module compatible with the USB
(Universal Serial Bus). Using a USB port allows the accessories to be connected after the
E5070B/E5071B has been powered on.
13. Ground Terminal
Connected to the chassis of the E5070B/E5071B. You can connect a banana type plug to
this terminal.
Display Area
The names and short description of the E5070B/E5071B parts on the display area are
shown as follows.
Figure 3-2
Display area
Chapter 3
47
Hide quick links:
Advertisement
Table of Contents
