uAvionix AV-30 Service Bulletin page 16

connector preventing proper seating of the AV connector preventing proper seating of the AV-Link. Also, make sure to
seat the AV-Link completely before tightening the Jack Screws. Do not Link completely before tightening the Jack Screws. Do not Link completely before tightening the Jack Screws. Do not
attempt to use the Jack Screws to pull the AV attempt to use the Jack Screws to pull the AV-Link into the AV-
connector. AV-Link should seat firmly into the AV Link should seat firmly into the AV-30 as shown in the image
on the right below.
AV-30-E Service Bulletin Software Upgrade 1.1.0 E Service Bulletin Software Upgrade 1.1.0
UAV-1005261-001 Rev A 1 Rev A
ink. Also, make sure to
-30
30 as shown in the image
16