Linking Trays - Sharp MX-B467F User Manual

Loading paper and specialty media
•
Load envelopes with the flap facedown on the left side.
•
Load European envelopes with the flap facedown and entering the printer first.
Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings,
or self‑stick adhesives.
5
From the control panel, set the paper size and paper type to match the paper loaded.

Linking trays

1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Paper > Tray Configuration.
3
Set the same paper size and paper type for the trays that you are linking.
4
Save the settings.
Note: You can also change the settings from the printer control panel.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
Warning—Potential Damage: The temperature of the fuser varies according to the specified paper type. To
avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.
23