Sharp MX-B467F User Manual page 94

Understanding the printer menus
Ethernet
Menu item
Network Speed
IPv4
Enable DHCP (On*)
Set Static IP Address
IPv6
Enable IPv6 (On*)
Enable DHCPv6 (Off*)
Stateless Address Autoconfiguration (On*)
DNS Server Address
Manually Assigned IPv6 Address
Manually Assigned IPv6 Router
Address Prefix (64*)
All IPv6 Addresses
All IPv6 Router Addresses
Network Address
UAA
LAA
PCL SmartSwitch
Off
On*
PS SmartSwitch
Off
On*
Job Buffering
Off*
On
Mac Binary PS
Auto*
On
Off
Energy Efficient Ethernet
On
Off
Auto*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Show the speed of the active network adapter.
Configure the IPv4 settings.
Configure the IPv6 settings.
Specify the network address.
Set the printer to switch automatically to PCL emulation when a print
job requires it, regardless of the default printer language.
Note: When this setting is disabled, the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Set the printer to switch automatically to PostScript emulation when
a print job requires it, regardless of the default printer language.
Note: When this setting is disabled, the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Temporarily store jobs on the hard disk before printing.
Note: This menu item appears only when a hard disk is installed.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
Auto processes print jobs from computers using either
Windows or Macintosh operating systems.
•
Off filters PostScript print jobs using the standard protocol.
Reduce power consumption when the printer does not receive data
from the Ethernet network.
94