Sharp MX-B467F User Manual page 51

Understanding the printer menus
Menu item
Date and Time
Network Time Protocol
Enable NTP [On*]
NTP Server
Enable Authentication
Paper Sizes
U.S.*
Metric
Screen Brightness
20–100% (100*)
Flash Drive Access
Enabled*
Disabled
Allow Background Removal
On*
Off
Allow Custom Job scans
On*
Off
One Page Flatbed Scanning
On
Off*
Audio Feedback
Button Feedback
On*
Off
Audio Feedback
Volume
1–10 (5*)
Screen Timeout
10–300 (60*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the settings for Network Time Protocol (NTP).
Notes:
•
Enable Authentication appears only in some printer
models.
•
When Enable Authentication is set to MD5 key, Key ID
and Password appear.
Specify the unit of measurement for paper sizes.
Note: The country or region selected in the initial setup
wizard determines the initial paper size setting.
Adjust the brightness of the display.
Note: This menu item appears only in some printer models.
Enable access to the flash drive.
Specify whether background removal is allowed.
Scan multiple jobs to one file.
Note: This menu setting appears only when a hard disk is
installed.
Set copies from the scanner glass to only one page at a time.
Enable audio feedback for button presses, panel interactions,
paper loaded prompts, and error notifications.
Note: This menu item appears only in some printer models.
Adjust the volume of the printer speakers.
Notes:
•
Changes to the volume are applied after the current user
session ends.
•
This menu item appears only in some printer models.
Set the idle time in seconds before the display shows the home
screen, or before the printer logs off a user account
automatically.
51