Sharp MX-B467F User Manual page 92

Understanding the printer menus
Menu item
Network Mode
BSS Type
Infrastructure*
Ad hoc
Preferred Channel Number
Auto*
1–11
Enable Wi‑Fi Direct
On
Off*
Compatibility
802.11b/g/n (2.4GHz)*
802.11a/b/g/n/ac (2.4GHz/5GHz)
802.11a/n/ac (5GHz)
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
802.1x - RADIUS
WEP Authentication Mode
Auto*
Open
Shared
Set WEP Key
WPA2/WPA - Personal
AES
Set Pre‑Shared Key
WPA2 - Personal
AES
802.1x Encryption Mode
WPA+
WPA2*
Description
Specify the network mode.
Note: Preferred Channel Number only appears if BSS Type is set to
Ad hoc.
Set the printer to connect directly to Wi-Fi devices.
Specify the wireless standard for the wireless network.
Note: 802.11a/b/g/n and 802.11a/n are selectable only if the Enable
Wi‑Fi Direct setting is disabled.
Set the type of security for connecting the printer to wireless devices.
Set the type of Wireless Encryption Protocol (WEP) used by the
printer.
Note: This menu item appears only if Wireless Security Mode is set
to WEP.
Specify a WEP password for secure wireless connection.
Enable wireless security through Wi-Fi Protected Access (WPA).
Note: This menu item appears only if the Wireless Security Mode is
set to WPA2/WPA-Personal or WPA2-Personal.
Set the password for secure wireless connection.
Enable wireless security through WPA2.
Note: This menu item appears only if the Wireless Security Mode is
set to WPA2/WPA-Personal or WPA2-Personal.
Enable wireless security through 802.1x standard.
Note: This menu item appears only if the Wireless Security Mode is
set to 802.1x - Radius.
92