Sharp MX-B467F User Manual page 100

Understanding the printer menus
Menu item
Bandwidth (bits/sec)
0*
100–1000000
Packet Size (kbytes)
0–64000 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Menu item
PCL SmartSwitch
On*
Off
PS SmartSwitch
On*
Off
Mac Binary PS
Auto*
On
Off
Enable USB Port
Enable*
Disable
Note: An asterisk (*) next to a value indicates the factory default setting.
Restrict external network access
Menu item
Restrict external network
access
Off*
On
External network address
E‑mail address for notification
Ping frequency
1–300 (10*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the speed to transmit data in a ThinPrint environment.
Set the packet size for data transmission.
Description
Set the printer to switch to PCL emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to switch to PS emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Enable the standard USB port.
Description
Restrict access to network sites.
Specify the network addresses with restricted access.
Specify an e‑mail address to send a notification of logged events.
Specify the network query interval in seconds.
100