Sharp MX-B467F User Manual page 179

Troubleshooting
Action
Step 5
Check if the cables connecting the printer and the computer are
inserted to the correct ports.
Are the cables inserted to the correct ports?
Step 6
Install the correct print driver.
Is the printer responding?
Step 7
Turn off the printer, wait for about 10 seconds, and then turn on the
printer.
Is the printer responding?
Adjusting toner darkness
1
From the home screen, touch Settings > Print > Quality.
2
Adjust the toner darkness.
3
Apply the changes.
Job prints from the wrong tray or on the wrong paper
Action
Step 1
a
Check if you are printing on the correct paper.
b
Print the document.
Is the document printed on the correct paper?
Step 2
a
Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.
Note: You can also change the settings on the printer control
panel. From the home screen, touch Settings > Paper > Tray
Configuration > Paper Size/Type.
b
Make sure that the settings match the paper loaded.
c
Print the document.
Is the document printed on the correct paper?
Yes No
Go to step 6. Insert the cables to
the correct ports.
The problem is Go to step 7.
solved.
The problem is Contact your dealer.
solved.
Yes No
Go to step 2. Load the correct
paper size and paper
type.
The problem is Go to step 3.
solved.
179