Sharp MX-B467F User Manual page 59

Understanding the printer menus
Menu item
Printer Emulations
Emulator Security
Reset Emulator After Job
Off*
On
Printer Emulations
Emulator Security
Disable Printer Message Access
On*
Off
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Print Configuration
Font Sharpening
0–150 (24*)
Print Configuration
Print Density
Disabled*
1–5
Copy Density
Disabled*
1–5
Device Operations
Quiet Mode
Off*
On
Device Operations
Panel Menus
Enable*
Disable
Device Operations
Safe Mode
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Reset the emulator after a print job.
Disable access to the printer message during emulation.
Set fax to enter Sleep mode whenever the printer determines
that it should.
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
Adjust the toner density when printing or copying documents.
Set the printer to reduce the amount of noise that it makes
when printing.
Note: Enabling this setting slows down the overall
performance of the printer.
Set the printer to show the menus on the control panel.
Note: This menu item appears only in the Embedded Web
Server.
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
59