Step 4: Create An Installation Map - enphase IQ 7 Installation And Operation Manual

Step 4: Create an Installation Map

The Enphase Installation Map is a diagram of the physical location of each microinverter in your PV
installation. Copy or use the blank map on page 37 to record microinverter placement for the system
or provide your own layout if you require a larger or more intricate installation map.
Each Enphase Microinverter, Envoy, and Battery have a removable serial number label. Build the
installation map by peeling the serial number labels from the microinverter mounting plates and
placing the labels on the map. You will also place the Enphase Envoy-S and IQ Battery serial number
on the map after installation.
After you have created the installation map, use the Enphase Installer Toolkit mobile app to record
serial numbers and configure the system.
For Installer Toolkit details refer to "Detect the Microinverters" in the help topics of the Installer Toolkit
app.
A. Peel the removable serial number label from each microinverter and affix it to the
respective location on the paper installation map.
B. Peel the label from the Envoy-S and any Enphase Battery, if installed) and affix it to the
installation map.
C. Always keep a copy of the installation map for your records.
15
IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved.
Affix serial number
labels
141-00044-02