enphase IQ 7 Installation And Operation Manual page 29

Microinverters
Table of Contents

Advertisement

Maximum
microinverters per 20A (max) AC branch circuit
3
230 VAC
EN 50530 (EU) weighted efficiency
230 VAC (single phase)
Static MPPT efficiency (weighted, ref EN 50530)
Total harmonic distortion
Ambient temperature range
Night tare loss
Storage temperature range
Compatibility
Dimensions not including mounting bracket
Connector type
Weight
Environmental category / UV exposure rating
Torque specifications for fasteners
(Do not over torque)
Cooling
Relative humidity range
Approved for wet locations
Pollution degree
Standard warranty term
Compliance
Grounding
Monitoring
Communication
Integrated DC disconnect
Integrated AC disconnect
Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.
3
.
29
IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
Enphase IQ7-60-2-INT Microinverter Parameters
Miscellaneous Parameters
Features and Specifications
© 2020 Enphase Energy Inc. All rights reserved.
%
%
%
C
mW
C
Pairs with most 60-cell PV modules (the PV module DC
conductors must be labeled "PV Wire" or "PV Cable" to be
compliant for Ungrounded PV Power Systems)
212 mm x 175 mm x 30.2 mm (approximate)
MC-4 (or Amphenol H4 UTX with additional Q-DCC-5
adaptor)
1.08 kg (2.38 lbs.)
IP67 / outdoor
6 mm mounting hardware: 5 N m
8 mm mounting hardware: 9 N m
When using earthing hardware, use the manufacturer's
recommended torque value
Natural convection - no fans
4% to 100% condensing
Yes
PD3
enphase.com/warranty
AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN 62109-1,
IEC/EN 62109-2
The DC circuit meets the requirements for ungrounded PV
arrays. Ground fault protection (GFP) is integrated into the
class II double insulated microinverter.
Enlighten Manager and MyEnlighten monitoring options
require an Enphase Envoy-S
Power line
The DC connector has been evaluated and approved for
use as the load-break disconnect.
The AC connector has been evaluated and approved for
use as the load-break disconnect.
16 (single-phase)
48 (multiphase)
96.5
99.5
-40
-40
141-00044-02
5
+65
50
+85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq 7+Iq 7xIq 7aIq7 seriesIq7plus-72-2-intIq7a-72-2-int

Table of Contents