Warranty Policy And Limitation Of Liability - IDTECK NEO RF245 User Manual

User Manual

12. Warranty policy and limitation of liability

IDTECK warrants this product against defects in material and workmanship for the period specified in the table below from
the date of purchase under normal customer use. This Warranty doesn't apply: 1) to any product which has been
dismantled without authorization of IDTECK or/and has a damaged or detached QC label on its back side; 2) to any losses,
defects, or damages caused by improper testing, operation, installation, maintenance, modification, alteration, or
adjustment; 3) to any product with a damaged or faded serial number on it; or 4) to any losses, defects, or damages caused
by lightning or other electrical discharge, natural disaster, misuse, accident or neglect.
This Limited Warranty is in lieu of all other warranties, obligations, or liabilities on the part of IDTECK, and IDTECK
DISCLAIMS ANY AND ALL WARRANTY, WHETHER EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.IDTECK does not, and cannot, know who is present, what property is located, where this product will
be used; it would be extremely difficult to determine the actual damages that may result from a failure of the product to
perform as anticipated; and the low price of this product is based upon the nature of the product provided and the limited
liability that IDTECK assumes. IDTECK IS NOT RESPONSIBLE FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR LOSS,
DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR OTHER LOSS, AND IDTECK'S MAXIMUM LIABILITY SHALL
NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT.
To obtain repair or replacement under the terms of this warranty, visit IDTECK's Website (http://www.idteck.com) and place
an online RMA request. After an RMA code is issued, return the product along with the authorization RMA code.
December. 2016 Copyright IDTECK Co., Ltd.
18