Safety Information - IDTECK NEO RF245 User Manual

1. Safety Information

To prevent safety accident and property damage, read through information below and use the product
properly.
This symbol indicates that dangerous voltage consisting risk of electric shock
Present within this unit
This exclamation point symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
Warning - Power
- Must use DC +12 V.
-
If any unusual smells or smoke comes from the unit, stop using the product.
Caution - Installation
- Do not install the unit in humid, dusty, or sooty locations.
- Do not install in a location subject to high temperature (over 60°C), low temperature (Below -35°C),or high
humidity.
- Do not operate the product with the tool in hand when power is on
Caution - Usage
- Do not drop objects on the product or apply strong blows to it. .
- Keep away from magnetic interference.
- Keep out of direct sunlight and heat radiation sources.
- If you want to relocate the already installed product, be sure to turn off the power and then move or re-install.
- Do not locate the device near combustible substance such as spray.
- Avoid being touched by other than administrator for the purpose of abnormal using.
- Do not change connection installed by technician
- When water or liquid gets into the device, turn off the power first.
- Caution - Cleaning
- When cleaning, do not spray water directly onto parts of the product.
- Clean only with dry cloth.
- Do not use chemicals or cleaning products.
December. 2016 Copyright IDTECK Co., Ltd.
3
User Manual