Nstalling The N Etwork D Rivers - 3Com EtherLink III User Manual

I
N
This chapter describes how to install the network drivers
required to let the EtherLink III adapter operate with your
network operating system (NOS). If you are running NetWare
2.x, 3.1 x, or 4.x, you can use 3Com's AutoLinkauto installation
feature, which automatically installs all the NetWare DOS
ODI client software (including drivers). Refer to Chapter 3 for
installation instructions. If you are running any other network
operating system, follow the driver installation instructions
in this chapter. For additional information, press [FI] to
access Help.
The EtherDisk diskette contains the latest versions of the
network drivers available when 3Com shipped the adapter.
It also contains other important information concerning
EtherLink III adapters and their configuration.
To obtain network operating system drivers not included on
J r the EtherDisk diskette, contact the manufacturer o f that
network operating system or application. To obtain a list o f
supported drivers along with software driver updates and
patches for the drivers on the EtherDisk diskette, use one o f
the bulletin board services listed in Appendix B, "Technical
Support." For example, Document 9071 in 3Com's CardFacts®
fax service contains a list o f all available drivers.
To install the network drivers:
1 Select Network Drivers in the main menu.
For instructions for accessing the main menu, refer to
Chapter 3, "Configuring the Adapter."
nstalling the
etwork
D
rivers