Nstalling The A Dapter; Getting Started - 3Com EtherLink III User Manual

2
This chapter describes how to install the EtherLink III adapter
in your computer. It includes instructions for inserting the
adapter into the computer and connecting the adapter to
the network using the on-board transceiver or an external
transceiver.

Getting Started

Open the shipping container and verify that you have received
ail items on the packing list. Inspect each item for damage.
CAUTION: Each adapter is packed in antistatic material to
protect it during shipment. To avoid damaging any
static-sensitive components after removal from the bag, be
sure to reduce any static electricity on your person. One way
to do this is to touch the metal chassis o f your computer. You
can maintain grounding by wearing a wrist strap attached to
the chassis.
You can install the EtherLink III adapter in either one of the
following environments:
■ An ISA adapter in an ISA computer
■ An ISA adapter in an EISA computer
If you are unsure of the type of media connector that your
adapter has, refer to Figure 1 -1.
In sta llin g the Adapter