System Requirements; Features - 3Com EtherLink III User Manual

The EtherLink 1 1 1 adapter can be installed in either ISA or EISA
computers, including the following:
■ IBM Personal Computer AT® (ISA only)
■ IBM Personal System/2® computers containing ISA or EISA
buses
■ Any compatible UL®-listed personal AT-compatible
computer that includes instructions for the installation of
hardware and software options inside the main system unit

System Requirements

The host system in which the EtherLink III adapter is installed
must meet these minimum requirements:
■ 80286 CPU or above
■ One 8 - or 16-bit slot
■ 16 bytes of I/O space, starting at any 16-byte boundary from
200h to 3F0h

Features

The EtherLink III adapter has the following features:
■ Hardware Plug and Play support, which automatically
configures ISA bus resources without user intervention
■ AutoLink™ auto installation software, which installs all
Novell® NetWare® DOS ODI client software into your
operating system
■ Auto Select Media Type capability, which enables certain
drivers to automatically detect the type of media connector
that connects the adapter to the network
■ Backward compatibility with existing (3C509) EtherLink III
ISA adapter drivers
■ Network management support through Transcend®
EtherLink SmartAgent™ software, which is auto-installed
with the drivers
System Requirements 1-3