Autolink Information Screen - 3Com EtherLink III User Manual

4 The first time you use the diskette to install an adapter, a
license screen appears.To accept the terms and conditions
of the 3Com end-user software license agreement, type
the following:
Y
To view the full text o f the license agreement, press [FI],
The AutoLink information screen appears, as shown in
Figure 3-1.
- - - - - - - — EtherDisk for the EtherLink III adaptor Family v.X.X
3Com's auto installation software (AutoLink) automatically configures your
adapter and workstation for use as a NetWare client. To use AutoLink:
* Have only one 3Com EtherLink III adapter installed
* Use NetWare v2.X, v3.1X, or v4.X as your network operating system
* Have DOS on the client being installed
AutoLink edits your AUTOEXEC.BAT and CONFIG.SYS files and saves the old
versions. Select General Information/Release Notes in the main menu for
information on AutoLink server support. To manually set up your adapter
or for information/drivers for other NOSs, use the options under Standard
Installation and Configuration in the main menu.
[ENTER]»Continue
[ESC]»Exit Program
Figure 3-1 AutoLink Information Screen
5 Read the screen and press [Enter].
AutoLink Software for NetWare Environments 3-3
'