Siemens Sinamics V90 Operating Instructions Manual page 71

Article No. 1FL60... 22
Moment of inertia 0.031
[10 kgm ]
-4 2
Moment of inertia 0.038
(with brake) [10
-4
kgm ]
2
Recommended load Max. 30x
to motor inertia ratio
Operating tempera- 1FL602❑, 1FL603❑ and 1FL604❑: 0 to 40 (without power derating)
ture [°C]
1FL605❑: 0 to 30 (without power derating)
Storage temperature -20 to +65
[°C]
Maximum noise level 60
[dB]
Oil seal lifetime [h] 3000 to 5000
Encoder lifetime [h] > 20000
Protection degree of IP 65
motor body
Protection degree of IP20
cable end connector
Holding brake
Rated voltage (V) 24 ± 10%
Rated current (A) 0.25
Holding brake torque 0.32
[Nm]
Maximum brake 35
opening time [ms]
Maximum brake 10
closing time [ms]
Maximum number of 2000
emergency stops
Weight
With brake 0.7
Without brake 0.5
When the surrounding temperature is between 30 °C and 40 °C, the 1FL605 motor will have a power derating of 10%.
1)
Restricted emergency stop operation is permissible. Up to 2000 braking operations for the motors of 0.05 kW to 1 kW,
2)
and 200 braking operations for the motors of 1.5 kW to 2 kW can be executed with 300% rotor moment of inertia as ex-
ternal moment of inertia from a speed of 3000 rpm without the brake being subject to an inadmissible amount of wear.
This lifetime is only for reference. When a motor keeps running at 80% rated value and the surrounding temperature is
3)
30 °C, the encoder lifetime can be ensured.
The former value indicates the data for low inertia motors with straight connectors; the latter value indicates the data for
4)
low inertia motors with angular connectors.
Note
The data of rated torque, rated power, maximum torque, and armature resistance in the
above table allows a tolerance of 10%.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2019, A5E36037884-007
24 32
0.052 0.214
0.059 0.245
3)
0.3
1.27
75
10
2)
0.9 1.5
0.6 1.0
34 42 44
0.351 0.897 1.15
0.381 1.06 1.31
Max. 20x
1)
0.35
3.18
105
15
1.9 3.7 4.2
1.5 2.8 3.4
General information
2.7 Technical data
52 54
2.04 2.62
2.24 2.82
Max. 15x
-
0.57
6.37
90
35
6.8/7.0 8.0/8.2
4) 4)
5.4/5.5 6.6/6.7
4) 4)
69