Keyboard - Leica GM30 User Manual

4.2
GR30/GM30

keyboard

ON/OFF button
Function button
Button
combinations
GR30/GM30/GR50, GR30/GM30 User Interface
Keyboard
a b
GR10_002
Button
ON/OFF

Hold the ON/OFF button for 10 s, to force the instrument to turn off. Instru-
ment settings and some data can be lost when using this method.

All the following functions described assume the GR30/GM30 is already on.
Button
Function
Buttons
+
c
Function
If GR30/GM30 already off: Turns on GR30/GM30 when held for
3 s.
If GR30/GM30 already on: Turns off GR30/GM30 when held for
3 s.
Function
The Function and ON/OFF button work in combination and
allow a number different functions as described in "Button
combinations".
The Function button switches between these different func-
tions.
How to
Activate dual button functionality
Press and hold both buttons until all LEDs are flashing. Then
release both buttons. After 1 s, the
starts flashing.
The following instrument commands are now activated.
After any of the instrument commands in this table was used,
the dual button functionality is turned off automatically. You
must turn on the dual button functionality every time before
using the instrument commands.
Start/Stop all logging sessions
Activate the dual button functionality.
If all logging sessions had been off, the Raw data logging LED
is flashing green.
a) ON/OFF button
b) Function button
c) LEDs
Raw data logging LED
35